Install the Fuel Master node
Before you install the Fuel Master node, complete the steps described in
Before you install Fuel,
Download the ISO image, and
Preparing an installation media.
To install the Fuel Master node:
- Insert or mount through IPMI (or using any other remote control utility
supported by your hardware) the media with the Fuel ISO on the server
that will be your Fuel Master node.
- Verify that the Fuel installation media is the first device in the boot
order.
- Power on the server. The Welcome to Fuel Installer screen appears.
- Select the installation media. If necessary, modify the boot settings by
pressing the Tab key to display the loader command line. Using this command
line, configure the IP address, default gateway, and DNS server settings of
the Fuel Master node.
- Proceed to Configure network parameters.