Create subnets¶

Before creating an L2 template, ensure that you have the required subnets that can be used in the L2 template to allocate IP addresses for the MOSK cluster nodes. Where required, create a number of subnets for a particular project using the Subnet CR. A subnet has three logical scopes:

global - CR uses the default namespace. A subnet can be used for any cluster located in any project.
namespaced - CR uses the namespace that corresponds to a particular project where MOSK clusters are located. A subnet can be used for any cluster located in the same project.
cluster - CR uses the namespace where the referenced cluster is located. A subnet is only accessible to the cluster that L2Template.metadata.labels:cluster.sigs.k8s.io/cluster-name (mandatory since MOSK 23.3) or L2Template.spec.clusterRef (deprecated since MOSK 23.3) refers to. The Subnet objects with the cluster scope will be created for every new cluster.

You can have subnets with the same name in different projects. In this case, the subnet that has the same project as the cluster will be used. One L2 template may often reference several subnets, those subnets may have different scopes in this case.

The IP address objects (IPaddr CR) that are allocated from subnets always have the same project as their corresponding IpamHost objects, regardless of the subnet scope.

To create subnets for a cluster:

Log in to a local machine where your management cluster kubeconfig is located and where kubectl is installed.

Note

The management cluster kubeconfig is created during the last stage of the management cluster bootstrap.

Create the subnet.yaml file with a number of global or namespaced subnets depending on the configuration of your cluster:

kubectl --kubeconfig <pathToManagementClusterKubeconfig> apply -f <SubnetFileName.yaml>

Note

In the command above and in the steps below, substitute the parameters enclosed in angle brackets with the corresponding values.

Example of a subnet.yaml file:

apiVersion: ipam.mirantis.com/v1alpha1
kind: Subnet
metadata:
  name: demo
  namespace: demo-namespace
  labels:
    kaas.mirantis.com/provider: baremetal
    kaas.mirantis.com/region: region-one
spec:
  cidr: 10.11.0.0/24
  gateway: 10.11.0.9
  includeRanges:
  - 10.11.0.5-10.11.0.70
  nameservers:
  - 172.18.176.6

Note

/./common/region-label-rm.rst

Specification fields of the Subnet object¶
Parameter	Description
`cidr` (singular)	A valid IPv4 CIDR, for example, 10.11.0.0/24.
`includeRanges` (list)	A list of IP address ranges within the given CIDR that should be used in the allocation of IPs for nodes. If the `includeRanges` parameter is not set, the entire address range within the given CIDR is used in the allocation of IPs for nodes. The gateway, network, broadcast, and DNS addresses will be excluded (protected) automatically if they intersect with one IP in the range. The IPs outside the given ranges will not be used in the allocation. Each element of the list can be either an interval `10.11.0.5-10.11.0.70` or a single address `10.11.0.77`. In the example above, the addresses `10.11.0.5-10.11.0.70` (excluding the gateway address 10.11.0.9) will be allocated for nodes. The `includeRanges` parameter is mutually exclusive with `excludeRanges`.
`excludeRanges` (list)	A list of IP address ranges within the given CIDR that should not be used in the allocation of IPs for nodes. The IPs within the given CIDR but outside the given ranges will be used in the allocation. The gateway, network, broadcast, and DNS addresses will be excluded (protected) automatically if they are included in the CIDR. Each element of the list can be either an interval `10.11.0.5-10.11.0.70` or a single address `10.11.0.77`. The `excludeRanges` parameter is mutually exclusive with `includeRanges`.
`useWholeCidr` (boolean)	If set to `true`, the subnet address (10.11.0.0 in the example above) and the broadcast address (10.11.0.255 in the example above) are included into the address allocation for nodes. Otherwise, (`false` by default), the subnet address and broadcast address are excluded from the address allocation.
`gateway` (singular)	A valid gateway address, for example, 10.11.0.9.
`nameservers` (list)	A list of the IP addresses of name servers. Each element of the list is a single address, for example, 172.18.176.6.

Note

You may use different subnets to allocate IP addresses to different Container Cloud components in your cluster. Add a label with the ipam/SVC- prefix to each subnet that is used to configure a Container Cloud service. For details, see Service labels and their life cycle and the optional steps below.

Caution

Use of a dedicated network for Kubernetes pods traffic, for external connection to the Kubernetes services exposed by the cluster, and for the Ceph cluster access and replication traffic is available as Technology Preview. Use such configurations for testing and evaluation purposes only. For the Technology Preview feature definition, refer to Technology Preview features.

Add one or more subnets for the LCM network:
- Set the ipam/SVC-k8s-lcm label with the value "1" to create a subnet that will be used to assign IP addresses in the LCM network.
- Optional. Set the cluster.sigs.k8s.io/cluster-name label to the name of the target cluster during the subnet creation.
- Use this subnet in the L2 template for all cluster nodes.
- Assign this subnet to the interface connected to your LCM network.
Precautions for the LCM network usage
- Each cluster must use at least one subnet for its LCM network. Every node must have the address allocated in the LCM network using such subnet(s).
- Each node of every cluster must have one and only IP address in the LCM network that is allocated from one of the Subnet objects having the ipam/SVC-k8s-lcm label defined. Therefore, all Subnet objects used for LCM networks must have the ipam/SVC-k8s-lcm label defined.
- You can use any interface name for the LCM network traffic. The Subnet objects for the LCM network must have the ipam/SVC-k8s-lcm label. For details, see Service labels and their life cycle.
Optional. Deprecated since MOSK 24.2 (Cluster release 17.2.0). Add subnets to configure address pools for the MetalLB service. Refer to Configure MetalLB for MetalLB configuration guidelines.

Optional. Technology Preview. Add a subnet for the externally accessible API endpoint of the MOSK cluster.

Make sure that loadBalancerHost is set to "" (empty string) in the Cluster spec.

spec:
  providerSpec:
    value:
      apiVersion: baremetal.k8s.io/v1alpha1
      kind: BaremetalClusterProviderSpec
      ...
      loadBalancerHost: ""

Create a subnet with the ipam/SVC-LBhost label having the "1" value to make the baremetal-provider use this subnet for allocation of addresses for cluster API endpoints.

One IP address will be allocated for each cluster to serve its Kubernetes/MKE API endpoint.

Caution

Make sure that master nodes have host local-link addresses in the same subnet as the cluster API endpoint address. These host IP addresses will be used for VRRP traffic. The cluster API endpoint address will be assigned to the same interface on one of the master nodes where these host IPs are assigned.

Note

We highly recommend that you assign the cluster API endpoint address from the LCM network. For details on cluster networks types, refer to MOSK cluster networking. See also the Single MOSK cluster use case example in the following table.

You can use several options of addresses allocation scope of API endpoints using subnets:

Use case	Example configuration
Several MOSK clusters with one management cluster	Create a subnet in the `default` namespace with no reference to any cluster. apiVersion: ipam.mirantis.com/v1alpha1 kind: Subnet metadata: name: lbhost-per-mgmt-cluster namespace: default labels: kaas.mirantis.com/provider: baremetal kaas.mirantis.com/region: region-one ipam/SVC-LBhost: "1" spec: cidr: 191.11.0.0/24 includeRanges: - 191.11.0.6-191.11.0.20 Warning Combining the `ipam/SVC-LBhost` label with any other service labels on a single subnet is not supported. Use a dedicated subnet for addresses allocation for cluster API endpoints.
Several MOSK clusters in a project	Create a subnet in a namespace corresponding to your project with no reference to any cluster. Such subnet has priority over the one described above. apiVersion: ipam.mirantis.com/v1alpha1 kind: Subnet metadata: name: lbhost-per-cluster namespace: my-project labels: kaas.mirantis.com/provider: baremetal kaas.mirantis.com/region: region-one ipam/SVC-LBhost: "1" spec: cidr: 191.11.0.0/24 includeRanges: - 191.11.0.6-191.11.0.20 Warning Combining the `ipam/SVC-LBhost` label with any other service labels on a single subnet is not supported. Use a dedicated subnet for addresses allocation for cluster API endpoints.
Single MOSK cluster	Create a subnet in a namespace corresponding to your project with a reference to the target cluster using the `cluster.sigs.k8s.io/cluster-name` label. Such subnet has priority over the ones described above. In this case, it is not obligatory to use a dedicated subnet for addresses allocation of API endpoints. You can add the `ipam/SVC-LBhost` label to the LCM subnet, and one of the addresses from this subnet will be allocated for an API endpoint: apiVersion: ipam.mirantis.com/v1alpha1 kind: Subnet metadata: name: lbhost-per-namespace namespace: my-project labels: kaas.mirantis.com/provider: baremetal kaas.mirantis.com/region: region-one ipam/SVC-LBhost: "1" ipam/SVC-k8s-lcm: "1" cluster.sigs.k8s.io/cluster-name: my-cluster spec: cidr: 10.11.0.0/24 includeRanges: - 10.11.0.6-10.11.0.50 Warning You can combine the `ipam/SVC-LBhost` label only with the following service labels on a single subnet: `ipam/SVC-k8s-lcm` `ipam/SVC-ceph-cluster` `ipam/SVC-ceph-public` Otherwise, use a dedicated subnet for address allocation for the cluster API endpoint. Other combinations are not supported and can lead to unexpected results.

Note

/./common/region-label-rm.rst

The above options can be used in conjunction. For example, you can define a subnet for all managed clusters within one management cluster, a number of subnets within this management cluster defined for particular namespaces, and a number of subnets within the same management cluster and namespaces defined for particular clusters.

Optional. Add a subnet(s) for the storage access network.
- Set the ipam/SVC-ceph-public label with the value "1" to create a subnet that will be used to configure the Ceph public network.
- Set the cluster.sigs.k8s.io/cluster-name label to the name of the target cluster during the subnet creation.
- Use this subnet in the L2 template for all cluster nodes except Kubernetes manager nodes.
- Assign this subnet to the interface connected to your Storage access network.
- Ceph will automatically use this subnet for its external connections.
- A Ceph OSD will look for and bind to an address from this subnet when it is started on a machine.
Optional. Add a subnet(s) for the storage replication network.
- Set the ipam/SVC-ceph-cluster label with the value "1" to create a subnet that will be used to configure the Ceph cluster network.
- Set the cluster.sigs.k8s.io/cluster-name label to the name of the target cluster during the subnet creation.
- Use this subnet in the L2 template for storage nodes.
- Assign this subnet to the interface connected to your storage replication network.
- Ceph will automatically use this subnet for its internal replication traffic.
Optional. Add a subnet for the Kubernetes Pods traffic.
- Use this subnet in the L2 template for all nodes in the cluster.
- Assign this subnet to the interface connected to your Kubernetes workloads network.
- Use the npTemplate.bridges.k8s-pods bridge name in the L2 template. This bridge name is reserved for the Kubernetes workloads network. When the k8s-pods bridge is defined in an L2 template, Calico CNI uses that network for routing the Pods traffic between nodes.
Optional. Add a subnet for the MOSK overlay network:
- Use this subnet in the L2 template for the compute and gateway (controller) nodes in the MOSK cluster.
- Assign this subnet to the interface connected to your MOSK overlay network.
- This network is used to provide denied and secure tenant networks with the help of the tunneling mechanism (VLAN/GRE/VXLAN). If the VXLAN and GRE encapsulation takes place, the IP address assignment is required on interfaces at the node level. On the Tungsten Fabric deployments, this network is used for MPLS over UDP+GRE traffic.
Optional. Add a subnet for the MOSK live migration network:
- Use this subnet in the L2 template for compute nodes in the MOSK cluster.
- Assign this subnet to the interface connected to your MOSK overlay network.
- This subnet is used by the Compute service (OpenStack Nova) to transfer data during live migration. Depending on the cloud needs, you can place it on a dedicated physical network not to affect other networks during live migration. The IP address assignment is required on interfaces at the node level.

Verify that the subnet is successfully created:

kubectl get subnet kaas-mgmt -oyaml

In the system output, verify the status fields of the subnet.yaml file using the table below.

Status fields of the Subnet object¶
Parameter	Description
`state` ^{Since 23.1}	Contains a short state description and a more detailed one if applicable. The short status values are as follows: `OK` - object is operational. `ERR` - object is non-operational. This status has a detailed description in the `messages` list. `TERM` - object was deleted and is terminating.
`messages` ^{Since 23.1}	Contains error or warning messages if the object state is `ERR`. For example, `ERR: Wrong includeRange for CIDR…`.
`statusMessage`	Deprecated since MOSK 23.1 and will be removed in one of the following releases in favor of `state` and `messages`. Since MOSK 23.2, this field is not set for the objects of newly created clusters.
`cidr`	Reflects the actual CIDR, has the same meaning as `spec.cidr`.
`gateway`	Reflects the actual gateway, has the same meaning as `spec.gateway`.
`nameservers`	Reflects the actual name servers, has same meaning as `spec.nameservers`.
`ranges`	Specifies the address ranges that are calculated using the fields from `spec: cidr, includeRanges, excludeRanges, gateway, useWholeCidr`. These ranges are directly used for nodes IP allocation.
`allocatable`	Includes the number of currently available IP addresses that can be allocated for nodes from the subnet.
`allocatedIPs`	Specifies the list of IPv4 addresses with the corresponding `IPaddr` object IDs that were already allocated from the subnet.
`capacity`	Contains the total number of IP addresses being held by ranges that equals to a sum of the `allocatable` and `allocatedIPs` parameters values.
`objCreated`	Date, time, and IPAM version of the `Subnet` CR creation.
`objStatusUpdated`	Date, time, and IPAM version of the last update of the `status` field in the `Subnet` CR.
`objUpdated`	Date, time, and IPAM version of the last `Subnet` CR update by `kaas-ipam`.

Example of a successfully created subnet:

apiVersion: ipam.mirantis.com/v1alpha1
kind: Subnet
metadata:
  labels:
    ipam/UID: 6039758f-23ee-40ba-8c0f-61c01b0ac863
    kaas.mirantis.com/provider: baremetal
    kaas.mirantis.com/region: region-one
    ipam/SVC-k8s-lcm: "1"
  name: kaas-mgmt
  namespace: default
spec:
  cidr: 10.0.0.0/24
  excludeRanges:
  - 10.0.0.100
  - 10.0.0.101-10.0.0.120
  gateway: 10.0.0.1
  includeRanges:
  - 10.0.0.50-10.0.0.90
  nameservers:
  - 172.18.176.6
status:
  allocatable: 38
  allocatedIPs:
  - 10.0.0.50:0b50774f-ffed-11ea-84c7-0242c0a85b02
  - 10.0.0.51:1422e651-ffed-11ea-84c7-0242c0a85b02
  - 10.0.0.52:1d19912c-ffed-11ea-84c7-0242c0a85b02
  capacity: 41
  cidr: 10.0.0.0/24
  gateway: 10.0.0.1
  objCreated: 2021-10-21T19:09:32Z  by  v5.1.0-20210930-121522-f5b2af8
  objStatusUpdated: 2021-10-21T19:14:18.748114886Z  by  v5.1.0-20210930-121522-f5b2af8
  objUpdated: 2021-10-21T19:09:32.606968024Z  by  v5.1.0-20210930-121522-f5b2af8
  nameservers:
  - 172.18.176.6
  ranges:
  - 10.0.0.50-10.0.0.90

Note

/./common/region-label-rm.rst

Create other subnets for your MOSK cluster:
- If you plan to create a multi-rack MOSK cluster, proceed to Create subnets for a multi-rack Mirantis OpenStack for Kubernetes cluster.
- If you plan to create a single-rack MOSK cluster, proceed to Create subnets for a MOSK cluster.