Mirantis Container Cloud (MCC) becomes part of Mirantis OpenStack for Kubernetes (MOSK)!

Starting with MOSK 25.2, the MOSK documentation set covers all product layers, including MOSK management (formerly Container Cloud). This means everything you need is in one place. Some legacy names may remain in the code and documentation and will be updated in future releases. The separate Container Cloud documentation site will be retired, so please update your bookmarks for continued easy access to the latest content.

Remove Ceph OSD manually¶

Warning

This procedure is valid for MOSK clusters that use the MiraCeph custom resource (CR), which is available since MOSK 25.2 to replace the deprecated KaaSCephCluster. For the equivalent procedure with the KaaSCephCluster CR, refer to the following section:

Remove Ceph OSD manually

You may need to manually remove a Ceph OSD, for example, in the following cases:

If you accidentally have removed an OSD with ceph CLI or rook-ceph-osd deployment.
If you do not want to rely on Ceph LCM operations and want to manage the Ceph OSDs life cycle manually.

To safely remove one or multiple Ceph OSDs from a Ceph cluster, perform the following procedure for each Ceph OSD one by one.

Warning

The procedure presupposes the Ceph OSD disk or logical volumes partition cleanup.

To remove a Ceph OSD manually:

Edit the MiraCeph resource on a MOSK cluster:

kubectl -n ceph-lcm-mirantis edit miraceph

In the spec.nodes section, remove the required devices item of the corresponding node spec. When using deviceFilter or devicePathFilter, update regexp accordingly.

If after removal devices, deviceFilter, or devicePathFilter become empty and the node spec has no roles specified, also remove the node spec.

Verify that all Ceph OSDs are up and in, the Ceph cluster is healthy, and no rebalance or recovery is in progress:

kubectl -n rook-ceph exec -it deploy/rook-ceph-tools -- ceph -s

Example of system response:

cluster:
  id:     8cff5307-e15e-4f3d-96d5-39d3b90423e4
  health: HEALTH_OK
  ...
  osd: 4 osds: 4 up (since 10h), 4 in (since 10h)

Stop all deployments in ceph-lcm-mirantis namespace to prevent autoscaling rook-ceph-operator deployment to 1 replica:
```
kubectl -n ceph-lcm-mirantis scale deploy --all --replicas 0
```
Stop the rook-ceph/rook-ceph-operator deployment to avoid premature re-orchestration of the Ceph cluster:
```
kubectl -n rook-ceph scale deploy rook-ceph-operator --replicas 0
```

Enter the ceph-tools pod:

kubectl -n rook-ceph exec -it deploy/rook-ceph-tools -- bash

Mark the required Ceph OSD as out:
```
ceph osd out osd.<ID>
```
Note

In the command above and in the steps below, substitute <ID> with the number of the Ceph OSD to remove.
Wait until data backfilling to other OSDs is complete:
```
ceph -s
```
Once all of the PGs are active+clean, backfilling is complete and it is safe to remove the disk.

Note

For additional information on PGs backfilling, run ceph pg dump_stuck.
Exit from the ceph-tools pod:
```
exit
```

Scale the rook-ceph/rook-ceph-osd-<ID> deployment to 0 replicas:

kubectl -n rook-ceph scale deploy rook-ceph-osd-<ID> --replicas 0

Enter the ceph-tools pod:

kubectl -n rook-ceph exec -it deploy/rook-ceph-tools -- bash

Verify that the number of Ceph OSDs that are up and in has decreased by one daemon:
```
ceph -s
```
Example of system response:
```
osd: 4 osds: 3 up (since 1h), 3 in (since 5s)
```

Remove the Ceph OSD from the Ceph cluster:

ceph osd purge <ID> --yes-i-really-mean-it

Delete the Ceph OSD auth entry, if present. Otherwise, skip this step.
```
ceph auth del osd.<ID>
```
If you have removed the last Ceph OSD on the node and want to remove this node from the Ceph cluster, remove the CRUSH map entry:
```
ceph osd crush remove <nodeName>
```
Substitute <nodeName> with the name of the node where the removed Ceph OSD was placed.
Verify that the failure domain within Ceph OSDs has been removed from the CRUSH map:
```
ceph osd tree
```
If you have removed the node, it will be removed from the CRUSH map.
Exit from the ceph-tools pod:
```
exit
```
Clean up the disk used by the removed Ceph OSD. For details, see official Rook documentation.

Warning

If you are using multiple Ceph OSDs per device or metadata device, make sure that you can clean up the entire disk. Otherwise, instead clean up only the logical volume partitions for the volume group by running lvremove <lvpartion_uuid> any Ceph OSD pod that belongs to the same host as the removed Ceph OSD.
Delete the rook-ceph/rook-ceph-osd-<ID> deployment previously scaled to 0 replicas:
```
kubectl -n rook-ceph delete deploy rook-ceph-osd-<ID>
```
Substitute <ID> with the number of the removed Ceph OSD.

Scale the rook-ceph/rook-ceph-operator deployment to 1 replica and wait for the orchestration to complete:

kubectl -n rook-ceph scale deploy rook-ceph-operator --replicas 1
kubectl -n rook-ceph get pod -w

Scale all deployments in ceph-lcm-mirantis namespace to continue spec reconcilation and regular Ceph Controller work:
```
kubectl -n ceph-lcm-mirantis scale deploy --all --replicas 3
```
Once done, Ceph OSD removal is complete.